Contender 35ST: Adrenaline-Fueled Angling
Ready, Set, Run
With the ability to strap up to 1,200 hp of outboard engines to the Contender 35ST’s transom, owners of this center-console can sprint to the fishing grounds before they finish their morning coffee. In fact, when powered with triple 350 hp Yamahas, the Florida-built boat has a reported top speed above 60 knots.
Built to Take It
Supporting all that horsepower is a wave-slicing, dual-stepped deep-V hull form with a fine entry and 24.5-degree transom deadrise. The steps aid in lift, reduce hydrodynamic drag, and increase overall efficiency. The hull is built with hand-laid fiberglass and a foam-cored fiberglass stringer system that adds backbone. Fully loaded, displacement is 13,500 pounds, according to Contender.
The Fishing Mission
This center-console’s single-level deck makes for sure footing when chasing a big fish around the boat.
Tools of the Trade
There are twin 40-gallon in-transom livewells, a 50-gallon in-sole livewell, four in-sole fish boxes, a coffin box with stowage below it, a 96-quart slide-out cooler, and a rocket launcher with rod holders to spare.
Grady-White Canyon 386: Born to Run
Go Fish
Grady-White’s Canyon 386 is set up for angling enthusiasts, with standards such as two 35-gallon livewells, two 149-quart fish boxes, a 291-quart fish box, 10 in-gunwale rod holders, and a lean bar with a rigging station. Owners can add 18-foot Gemlux carbon-fiber outriggers.
How It’s Made
The Canyon 386 is constructed with a hand-laid fiberglass hull and deck. All in, this center-console displaces 14,950 pounds sans motors. The boat has Grady-White’s SeaV2 deep-V hull form, which has a continuously variable deadrise from the bow to the transom. At the transom, deadrise is 20 degrees.
Have It Your Way
Some options for the Canyon 386 include a choice of four hull colors (celestial blue, coastal fog, ocean mist and sea glass), a grill in lieu of the storage area on the lean bar, T-top color and an electrically adjustable bow table.
Triple Threat
Power for this fishing-focused center-console is a trio of 450 hp Yamaha outboards. The builder reports a top-end speed of about 52.3 knots at 6,000 rpm. At 3,300 rpm, cruise speed is about 26 knots. Dial it up to 4,000 rpm for a fast cruise of about 33.8 knots.
Scout Boats 357 LXF: Level Up
How It Starts
Scout puts big-boat build quality into its 357 LXF with an epoxy-infused hull that provides strength without added weight. The hull has a deep-V form with a knifelike entry for cutting down the chop. It also has 22 degrees of transom deadrise. Twin steps reduce drag, and increase the ride and fuel efficiency. Add a Seakeeper 3 (DC version) to make the trip as stable as a table.
Off Like a Shot
Power options range from twin 450 hp outboards to triple 300 and triple 400 hp outboards from Yamaha or Mercury. With triple 400 hp Mercury V-10 Verado outboards, Scout reports a top hop of around 62.3 knots at 6,400 rpm. Best cruise speed is 38 knots, where the 357 LXF earns about 1.15 mpg.
Let’s Go Fishing
Standard angling gear includes a transom livewell, 60-gallon transom fish box, 10 flush-mount rod holders, in-sole fish boxes aft and undergunwale rod stowage. Options include Taco outriggers (15 to 20 feet in carbon fiber or aluminum), a retractable rocket launcher and bow rod holders.
Tech It Out
Garmin electronics, FLIR night vision and solar panels are also available.
Sōlace 37CS: Go Far, Go Fast
Confidence-Inspiring Build The Sōlace 37CS starts with vacuum-infused carbon fiber and epoxy-resin-blend hull construction. Sōlace offers owners a 10-year hull-and-deck warranty. The hull is a variable-deadrise, dual-stepped form for running in rough water.
Fishing-Feature-Filled
Standard angling amenities include twin 40-gallon livewells, 16 flush-mounted, in-gunwale rod holders (and nine more in the transom), two in-sole fish boxes (40 gallons and 73 gallons), two electric reel outlets, tackle stowage, and in-cabin stowage for 11 rods and two gaffs. Angling options include tuna tubes, a folding marlin tower, Gemlux swivel rod holders, 22-foot Gemlux outriggers, a transom fish-box chiller and more.
Power Play
Outboard engine options are from Mercury or Yamaha, and include twin 400 hp or 450 hp motors, or triple 350 hp, 400 hp or—for those with a real need for speed—450 hp outboards.
Personalize It
Some other notable options include a choice of four hull colors, three upholstery styles, a Quick gyrostabilizer, Garmin electronics and a Humphree trim-tab upgrade.
Pursuit S 328 Sport: Fishing Is the Mission
Solid Underfoot
The Pursuit S 328 Sport starts with a hand-laid fiberglass hull reinforced with an infused-fiberglass structural-grid system, forming a strong backbone for long offshore runs. The transom is resin-infused with a reinforcement grid to accommodate big outboards.
Driving Force
The S 328 Sport can handle twin 300 hp or 350 hp Yamahas. Pursuit reports a 31-knot cruise speed with the 350s and a 46.8-knot top hop. With the 300s, cruise speed is 28 knots and top speed is 43 knots.
Let’s Get Catching
Standard fishing features include a 24-gallon livewell with an acrylic lid, four in-gunwale rod holders, five transom rod holders, two in-sole fish boxes, and undergunwale and underhardtop rod stowage. Angling options include 18- or 20-foot outriggers (telescoping and carbon fiber, respectively), and rod holders in the hardtop and at the bow.
Kit It Out
Owners have a choice of six hull colors: carbon, Neptune gray, Gulf Stream blue, flag blue, arctic blue and fresh white. Options include a Garmin Fantom radar upgrade, electric sunshade and underwater lights.
Jupiter 32: Speedy Pelagic Platform
It’s a Hull Thing
The Jupiter 32 is built on a deep-V hull form with a 60-degree entry and 24-degree transom deadrise. The boat runs on a Posi-Stern hull pad, so the keel has a flatter section that enhances lift and tracking. The design also reduces hydrodynamic drag, enhancing overall performance without compromising the wave-dicing benefits of the deep-V form.
Supporting Cast
The resin-infused fiberglass hull has closed-cell PVC foam coring, and the deck is mechanically fastened and fiberglass-bonded to the hull. Additionally, there is a fiberglass uni-grid stringer system. An inner liner is bonded to the hull for added strength.
Prepare for Launch
The Jupiter 32’s power options include twin 300 hp or 400 hp Yamaha outboards, but the boat is rated for a maximum of 900 hp, so perhaps 450s for those who need more speed.
Wet a Line
When it comes to angling, there are two 250-quart cockpit fish boxes with macerators, a bait-prep center, a 35-gallon transom livewell, four rod holders, and a 90-quart console cooler forward of the helm. Just add outriggers and head out on the hunt.
Intrepid 41 Panacea: In Pursuit
It Starts With the Ride
The 41 Panacea is built on Intrepid’s trademark single-step hull form. The design helps to optimize lift abaft the step, enhancing the boat’s overall performance with a dry ride and level running attitude.
Power Up
To make the most of this hull form, Intrepid offers several Mercury power options, including twin 600 hp V-12 Verados, triple 400 hp V-10s and quad 400s. The builder says other triple-engine options are available. The quad 400s give the 41 Panacea a reported top-end speed of 60-plus knots, so if time is an issue, this boat will make the most of the day.
The Standards
For angling aficionados, this center-console has two 34-gallon transom livewells as well as 140 gallons of fish-box stowage. Additionally, the boat has a cabin with a fridge and a single-burner cooktop. There is a Paguro generator, cabin and cockpit air conditioning (two 16,000 Btu units), as well as a bow thruster.
Tailor It
As a semicustom builder, Intrepid offers an options list that is long, but a couple of notable add-ons are an AC-power Seakeeper 4.5 gyrostabilizer and a stern thruster.
Edgewater 340CC: Ready to Roam
Purposeful Design
Edgewater’s 340CC has a deep-V, variable-deadrise hull form that transitions from its wave-slicing bow to 23.5 degrees at the transom. The builder says the boat has an optimized length-to-beam ratio to ensure a stable ride. Time on board can be even more sure-footed with a Seakeeper 2.
Robust Build
Edgewater uses a single-piece-infusion construction process, creating a stout, monocoque structure backed by a limited lifetime structural hull warranty. All in, the 340CC displaces 12,800 pounds, which should make the ride comfortable on offshore runs.
Prop Power
This center-console can handle up to 900 total horsepower. When powered with twin 425 hp Yamaha outboards, the 340CC reportedly tops out at 51 knots at 6,100 rpm. At 4,000 rpm and 32 knots, it has a 340-nautical-mile range with a 10 percent reserve.
Go Fish
The 340CC is delivered standard with six in-gunwale rod holders, four vertical rod holders and a 32-gallon livewell. Other angling options include a 38-gallon livewell, 18-foot Taco outriggers, a spear-gun rack and pre-rigging for electric reels.
Tiara Yachts 43 LS: Family Fishing Fun
Personalized Pelagic Pursuer
The Tiara Yachts 43 LS is offered with a fishing-module option that turns the cockpit into an angler’s oasis. The setup includes a 30-gallon livewell; a 104-quart coil-wrapped freezer tank; four rod holders aft; a hardtop rocket launcher with room for seven rods; 20-foot Taco Marine Grand Slam outriggers with carbon-fiber poles; a cutting board; a sink and more. Owners can add four more in-gunwale rod holders. Cooperative fish not included.
On the Move
Power for the Tiara 43 LS is a pair of 600 hp Mercury V-12 Verado outboards. The builder reports a top-end speed of 47-plus knots. Optimal cruise speed is reportedly 38.1 knots at 5,000 rpm, burning 62.8 gph and providing a 220-nautical-mile range. That should be plenty of speed when the bite is on and time is short.
Built to Take It
The boat’s hull and structural-grid systems are infused fiberglass, while the deck is hand-laminated with a balsa core. The transom has a five-ply resin-infusion build with a transom reinforcement grid. The builder offers owners a five-year hull-and-deck warranty.
